Pure C-810 Flash Buchi is a flash chromatography system for small- or large-scale purification of complex mixtures. It is equipped with a UV-vis detector ranging from 200 to 800 nm wavelength that enables the identification of those organic compounds we work with. It can be operated safely...

Spray drying is a processing technology to transform a liquid feedstock into a dried powder through four fundamental steps: Atomization of the feed into a spray, spray gas contact, solvent evaporation and separation of the dried product from the drying medium. The S-300 Buchi Spray Dryer has an...

Mettler Toledo DSC 821e model that operates in the temperature range -150 - 500ºC equipped with a liquid nitrogen cryostat and a 200W furnace supply which allows maximum heating rates of 20ºC/min. Ceramic sensor plate guarantees robustness and design

Carboltie Gero Laboratory Ovens are devices that can meet the precise temperatura control and temperatura uniformity requirements for the synthetic laboratory work. It is used for a wide range of applications such as drying, evaporating, curing or in our case synthesis of MOFs. Depending on the...

This platform allows to automatically dispense virtually any liquid / solid into any type of container. The GPU-P gravimetric dispensing unit reduces dosing times (typically 20 sec for 1 g depending on powder flow properties) with a 10 µg resolution. Liquid handling in powdered by 4 syringe pumps...

Vertical laminar flow cabin model AV30/70 from Telstar equipped with a spin coater SUSS LabSpin6 BM Bench mounted system for two-inch wafers or small rectangular substrates. Speed: 100 - 8.000 rpm, acceleration 4.000 rpm/sec and spinning time: 1 s up to 999 s

Cleanroom class ISO 7 with a surface of 80 m2. Several instruments are available inside: Electron-beam lithography, Laser writer optical lithography, ellipsometry, UHV evaporators, Plasma ICP-RIE dry etching, Sputtering, wire bonder and optical microscope.

Creality Ender 3S1 3D printer with FDM (Fused Deposition Modeling) technology with a printing volume of 220 x 220 x 270 mm. It can print with a resolution of 160 µm on the Z axis and 150µm on the XY axis. It is equipped with a printing bed that can be heated to up to 100oC. It supports the most...

Sentech SE801 spectroscopic ellipsometer. Wavelength: 190nm -1100 nm, Xe Lamp, with fixed angle at 70 degrees.

The high-speed benchtop centrifuge Centrifuge 5804/5804 R is suitable for medium-throughput molecular biology applications. It handles all common tube formats from 0.2?mL to 250 mL as well as plates, offering a with high versatility thanks to a broad range of rotors and adapters.